Why is gas flames orange
One of the things that you should know is that the flames from your natural gas stove can give you an idea about whether a potential fire hazard exists or not. It could tip you off and make it easy for you to avoid such a problem. When you light up the burner, you mostly see a blue flame. While fire is usually orange, if you take a close look at your natural gas stove, you will realize that it burns with a blue flame.
Understanding the science behind the colors in a fire is important so that you know exactly what is happening. However, the same cannot be said for a controlled fire atop a gas stove. That one burns blue. You see, the wood fire is generally orange because of the sodium that is present in the wood. When you light up the fire, the sodium gives off a bright orange hue.
The small part of the wood that is blue is because of the carbon and hydrogen since they tend to emit shades of violet and blue when they are heated. One of the reasons could be that your burner is releasing unsafe amounts of carbon monoxide gas and needs to be fixed.
To further understand this problem, it is important to get a better idea about the principles of combustion, which is what causes the fire in the first place. In order for combustion to occur completely, the gas stove has to supply just the right amount of fuel, and it must be balanced and mixed with adequate levels of oxygen. This leads to the creation of carbon dioxide, a very common gas found in our atmosphere.
If you have an orange or yellow burner flame on your gas range make sure the burner portholes are clean and free of debris. Spillovers and cooking grease can block these openings which can affect the flame color. Make sure the burner holes and ignitor are clean and free from any debris. Use an old toothbrush to clean these areas. If you take the burners apart to clean them, make sure you place them back in their proper position.
This can also affect the flame color on your range. Be sure you are using the proper orifices depending on whether your range uses liquid propane LP or natural gas. Was your range converted from one energy source to another? Other adjustments might need to be made depending on your range. Most ranges are sold with LP Orifices and are attached to a storage area on the range in a plastic bag.
After leaving the area, quickly contact Jackson Energy Authority at to report your CO problem. Sign In Request Service Emergency. Proper Flame Natural gas requires the correct air-to-gas ratio in order to combust or burn. A CO problem should be suspect if you experience the following: Flu-like symptoms are not accompanied by fever Symptoms occur or get worse following the use of a fuel-burning device More than one person in the home becomes ill at the same time The symptoms disappear after leaving the house or area If you suspect a CO problem, it is important to turn off the appliance and open doors and windows to allow fresh air to circulate to remove the CO.
The blue color in a flame is seen on the gas stove when the hydrocarbon gas in the stove finds sufficient oxygen with which it reacts to produce heat. When the gas finds a sufficient amount of oxygen and proper combustion takes place, it creates a greater level of energy which makes the molecules of the gas excited and ionized.
As a result of this proper combustion, the flame of the gas stove appears blue. It is advised to deal with the gas stove properly. One should be very careful while using the gas stove. Whenever you find a tiny difference in the color of the flame, repair it before working on it. Skip to content.
We're an affiliate We hope you love the products we recommend! Contents hide. How do I fix the orange flame on my gas stove? Proper Orifices:. Clean Burners:.
0コメント