What is lexus park assist

Also, due to the sensor being frozen at low temperatures, a malfunction display may appear or an object may not be detected. If the sensor thaws out, the system should return to normal. Failing to do so may result in the vehicle being unable to be driven safely and possibly cause an accident. Have the vehicle checked by your Lexus dealer. If the error occurs even if there is no ice, snow or mud on the sensor, it is likely that the sensor is malfunctioning.

Automatic mode The parking brake is set or released automatically according to the shift lever operation. The driver must visu- ally confirm this area directly. The area covered by the camera is limited. Objects which are close to either corner of the bumper or under the bumper cannot be seen on the screen. The area displayed on the screen may vary according to vehicle orientation or road conditions. In the following cases, it may be difficult to see the images on the screen, even when the system is functioning correctly.

The vertical streak also appears in the masked. Contact your Lexus dealer. Rinse with water and wipe with a soft cloth. If extremely dirty, wash with a mild cleanser and rinse. When changing the tires, consult your Lexus dealer. Be sure to check visually behind and all around the vehicle before proceeding.

Doing so may result in the camera malfunctioning. When driving near the obstacle, the obstacle may be displayed as outside the projected course line, and it may seem that there is no danger of a colli- sion, however any sections protruding from the wall may project over the course line and the vehicle may actually collide with the obstacle.

In cases such as this were the projected course line passes close to obstacles, always visually check the surroundings for safety. If the steering wheel is turned to full lock, the vehicle will turn in the smallest possible turning circle, and may collide with the obstacle.

The 4-Wheel AHC adjusts the vehicle height in accordance with driv- ing conditions. This mode is suitable for ordinary driving. When driving at high speeds, the vehicle height is automatically lowered by 0. When the vehicle begins to lower a beep will sound twice, and while the vehicle is lowering the indicator light will flash to alert the driver and surrounding people that the vehicle is lowering.

The indicator light stops blinking, and comes on continuously to indicate that the shift is completed. Easy access mode is available if the following conditions have been met: l The vehicle height mode is in normal mode. The following method will cancel the vehicle lowering operation and raise the vehicle again: l Press the height control OFF switch.

Push the switch again to turn the system back on. On even roads, the height mode will not change. The vehicle height is raised to 0. Take extra care when driving in this condition. If the vehicle height still cannot be raised, turn the ignition off then on again, then try once more.

This is not a malfunction. Once the vehicle has been driven for a short time and the suspension fluid has been warmed to within normal operating limits, the 4-Wheel AHC will begin operating and the vehicle height will auto- matically change to the selected mode. When parking, make sure there is nothing under the vehicle that may come in contact with the underbody.

The vehicle will return to the set height when the engine is started. This does not indicate a malfunction. However, the system may not switch to normal mode depending on the location of the malfunction. The warning message is displayed on the multi-information display, and the 4-Wheel AHC cannot be activated until the malfunction is corrected.

Stop the engine and start it again. If the warning message turns off, the sys- tem is operating correctly. If the warning message continues to be displayed, have the vehicle checked at your Lexus dealer as soon as possible. If you do not do this, body parts may be caught in the vehicle, possibly lead- ing to an accident. Otherwise the vehicle height may change due to the auto- matic leveling function, resulting in an accident. Take care when overhead height is limited.

Leave at a few seconds between selections when changing the vehicle height mode. AVS controls the suspension according to the road and driving condi- tions.

Selecting an optimum driving mode assists good riding comfort and stability. The operating procedures of voice Obtaining warranty service The tires that come as original equipment on your vehicle are warranted by their manufacturer and not Lexus. If an error is detected when the intuitive parking assist is turned on, the vehicle symbol comes on or flashes with beeping sounds. The intuitive parking assist failure warning display is not given in either of the following operations:.

If the failure warning does not go off even after the foreign matter is removed, the intuitive parking assist may be malfunctioning. Opening, closing and locking the doors Smart access system with push-button start The following operations can be performed simply by carrying the electronic key including the card key on your person, for example in your pocket. Natural speech information Due to natural language speech recognition technology, this system enables recognition of a command when spoken naturally.

However, the system cannot recognize every variation of each command. Registering preset destinations 1. Touch one of the preset destination buttons. You can set a preset destination to any preset destination button that has not yet been set. Intuitive parking assist The distance to obstacles measured by the sensors is communicated via the display and a buzzer when parallel parking or maneuvering into a garage.

Types of sensors 1. Front corner sensors 2. Front center sensors 3. Rear corner sensors 4. Rear center sensors Setting the intuitive parking assist mode 1. Push the menu switch. The intuitive parking assist indicator will be displayed. Each pushing of the switch turns the intuitive parking assist on and off. Parking Support Brake function for static objects When a collision may occur with a static object while parking or traveling at low speeds, when the vehicle suddenly moves forward due to mistaken accelerator pedal operation, or when the vehicle.

The system is intended to assist the driver check areas that are not easily visible. The system has the following 2 funct. Driving assist systems To keep driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should n. Grip the driver's d.